- Look for the location were suitable for placement of water pump machine. Hiring the holer to drilling the water source!
- Then, make the base of water pump machine by using cement beside the source water. If you put your machine in outdoor, you must make the lid for your machine. So if rain is fall, your machine will be protected from electric short circuit.
- While waiting the base dry, prepair the pipe installations of water pump machine! Use the pipe glue to connect pipes!
- After the base is dry, connect the water pump machine with pipes instalation. Make sure, pipes that you connect in the fit valves. And make sure, pipe from input valve to water source or pipes from output valve was not leak! So your machine can work properly.
- Connect power cable! Use a cable with good quality. Because water pump machine need high electric power.
- Then, adjust the pressure at automatic switch, so your water pump can turn off automatically when the water tap was closed.
- Test your water pump machine! If your water pump was not working properly, you need second handling for your water pump machine. You must pour the water into tube of water reserves that found in water pump.
- If your water pump machine is working properly, You can use it now.
I use water pump machine because this machine was very usefull in daily life. Peoples can take the ground water with use this machine. Or bring the water from low place to higher place. J
Name : Dedy Prastyo NIRM : 11.21.00.10
Tidak ada komentar:
Posting Komentar